Samsung SSD Data Migration v.3.1User Manual

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT  NOTICE.Products and specifications discussed herein are for reference purposes only. All information discussed herein is provided on an “AS IS” basis, without warranties of any kind. This document and all information discussed herein remain the sole and exclusive property of Samsung Electronics. No license of any patent, copyright, mask work, trademark, or any other intellectual property right is granted by one party to the other party under this document, by implication, estoppels, or otherwise. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply. For updates or additional information about Samsung products, contact your nearest Samsung office.

Copyright © 2018

This material is copyrighted by Samsung Electronics. Any unauthorized reproductions, use or disclosure of this material, or any part thereof, is strictly prohibited and is a violation of copyright law.

The Samsung Logo is the trademark of Samsung Electronics. All other company and product names may be trademarks of the respective companies with which they are associated.

The Samsung Data Migration software is designed to help users quickly, easily, and safely migrate all of their data – including their current operating system,  application software, and user data – from their existing storage device (e.g. HDD) to their new Samsung SSD. Samsung Data Migration software is developed and distributed exclusively for owners of Samsung Solid State Drives (SSDs).

1. When cloning the content of the source drive (e.g. HDD), all data on the Target Disk (Samsung SSD) will be deleted and is impossible to recover. Therefore, if you have stored any data that you would like to keep on the Target Disk, please back it up in advance.※ This software is not a data backup solution.2. Samsung Electronics assumes no responsibility for any loss of data that may occur on the Target Disk in the course of using this software and will not be held liable for data recovery services. Even if the migration process fails, data contained on the Source Disk is not affected.3. Before cloning the Source Disk to the Target Disk (Samsung NVMe SSD) using this software, make sure that you install the Samsung NVMe Driver first.

1. Support for new models2. Improvements to the cloning compatibility

1. (Normal Mode) If the Source Disk is smaller than the Target DiskSTEP 1. Start migration

STEP 2. Connect Target Disk

① If the Target Disk is connected, the status of the Target Disk is displayed on the screen.※ You may need a separate M.2 PCIe/USB converter (connector) to connect an NVMe SSD.

STEP 3. Start cloningSTEP 4. Cloning in progress

STEP 5. Cloning complete

2. (Advanced Cloning) If the Source Disk is bigger than the Target DiskSTEP 1. Start migrationSTEP 2. Connect Target Disk ① If the Target Disk is connected, the status of the Target Disk is displayed on the screen.※ You may need a separate M.2 PCIe/USB converter (connector) to connect an NVMe SSD.

STEP 3. On the Disk Analysis and Cloning Settings screen, click [Next>>]STEP 4. On the Disk Analysis Summary screen, click [Next>>]STEP 5. Scan for files in the Library folder to exclude from cloning.STEP 6. If the list of files to be excluded is displayed, go to Step 10, If the list of files to be excluded is not displayed, go to Step 7 STEP

7. Click the Browse buttonSTEP 8. Set a new folder to scan for files to exclude from cloning ① Select “Scan selected folders” or “Scan all folders” and click [Search].

STEP 9. Scan for files to exclude from cloning in the newly set pathSTEP 10. Select files to exclude from cloning① Continue selecting files to exclude until the text below the Browse button changes to “Ready to clone to the Target Disk”.STEP 11. In the screen for selecting files to exclude, click [Next>>]

STEP 12. To clone everything except the selected file(s), go to Step 13. To delete the selected file(s) and clone everything else, go to Step 14. To save the selected file(s) to another storage device and continue cloning, go to Step 15.STEP 13. Cloning everything except the selected files

① Select the [Clone everything except the selected file(s)] option and then click the [Next>>] button.

STEP 14. Clone after deleting the selected files① Select the [Delete the selected file(s) and continue cloning] option and then click the [Next>>] button.STEP 15. Cloning after saving the selected files on another storage device

① Select the [Save the selected file(s) to another storage device and continue cloning] option.② Select the storage device where you want to save the selected file(s).③ Click the [Next>>] button.

STEP 16. Start cloning

STEP 17. Cloning in progressSTEP 18. Cloning completeMay 2018www.samsung.com/ssdwww.samsungssd.comThe design and contents of this manual are subject to change without notice.© 2018 Samsung Electronics, Co., Ltd. All rights reserved.

Refrigerator

Specs Sheet: SPEC-SHEET_MC17J8000CS_070115 Specs Sheet: MC17J8000CS Install: 012505563539_install

Samsung U28R55 User Manual - Optimized PDF Samsung U28R55 User Manual - Original PDF

Samsung Refrigerator User Manual - Optimized PDF Samsung Refrigerator User Manual - Original PDF